It will not be an exaggeration to say that a window is supposed to be one of the most significant parts of your house since a window is the doorway of receiving the sunlight or nature’s other blessings. Sitting beside the casement for long hours will not let you get bored at all. Apart from that, it is necessary for maintaining the safety of your home. Quite naturally, when it is damaged or broken, it becomes mandatory to restore it as soon as possible.

There can be multiple reasons that may harm your glass window including:

  • Storm or any other natural calamity
  • Careless attitude of a kid
  • Weak or cracked glass
  • Aggressiveness
  • Vandalism

Whatever be the cause is, you will definitely be in need to replace the window in no time, is not it true? Well, before taking any step, know more about the details of the full procedure through which you are going to mend or replace the disordered window. Though it is always better to get in touch with the nearby experienced glazier to get rid of the hazardous situation, in certain cases, you can do it all by yourself only. Understand now when you will be able to fix the shattered glass of your casement.

When you need support from a glazier?

Actually, if there is a double-pane window, you should opt for an expert that is not mandatory when it is a single-pane window. If yours is a thermo-pane glass with two glass panels, you must call a professional to repair it but on the other hand, some tools and materials are simply enough to fix the problem of a single-pane window without taking anyone’s help.

Things you require to fix the issue:

The list includes equipment and materials. These are as follows:

  1. Tools:
  • Putty knife
  • Carpenter’s knife
  • Wood chisel
  • Screwdriver
  • Caulk
  • Pencil
  • Paintbrush
  • Pliers
  • Glass cutter
  • Measurement tape
  • Metal straight edge
  • Rubber mallet

Point to remember:

You must take a pair of leather work gloves and a proper eye protection to maintain your safety all through the procedure.

  1. Materials:
  • Sandpaper
  • Glazing
  • Glazing compound
  • Glazing points
  • Linseed oil
  • Replacement glass
  • Exterior-grade paint

Complete process of replacing a single-pane window:

Read between the lines of the following points to comprehend the method of replacing your glass window thoroughly.

Prepare yourself:

At the very beginning, make yourself ready by wearing the eye-protection and leather hand gloves properly so that nothing would harm you.

Take out the broken glass:

Thereafter, remove the broken glass with the help of the putty knife. If the attached glazing compound is too hard to be taken away, make use of a heat gun to soften that part. This would allow you to scrape away the old glazing compound. Apart from using that knife, you have to utilize a screwdriver and pliers to take the glazing points out.

Clean the frame:

These mentioned hardened compounds can come out as the large and hard chunks, and you have to make those rough edges smooth with sandpaper. Use wood chisel for scraping down the L-shaped channel fixed around the window frame. Do not forget to apply linseed oil with a paintbrush to seal any kind of uncovered wood.

Measure the new glass:

Next, since now you have the clear and nice opening, you should take the measurement of the same, so that you can have the perfect size of the glass. Calculate the height and width properly and visit a hardware store after that to get a new glass.

On the other note, if you are likely to select any alternative way, you may cut a portion of glass of your own also.

Install the newly opted glass:

Apply latex caulk around the edge of the opening and thereafter, install the newly arranged pane. Put in the glazing points properly which will help the new glass to fit nicely into the frame.

Apply glaze to your window:

After the discussed process, use the putty knife again to coat the new compound around the glass’s perimeter. Never allow any gap to be left there and remember to fill those gaps. Latex based compound becomes dry fast, but if you have oil-based one, make it easier to work with by heating the container.

Paint at the end:

Now, you have to wait for at least 5 days as the glazing compounds take that much time to get dry. This period may increase too. After it becomes dry and hard, you must paint the exposed parts with the exterior-grade paint. At the extreme end after the paint gets dry, you should finally clean the glass.

Last but not the least; if you are not okay with doing all these of your own, call an expert immediately to fix this issue with ease.

Blog by Glass Repair Perth





How useful was this post?

Click on a star to rate it!

Call Now Button